|
|
|
Main Links
|
OpenTracker In my quest for a better APRS tracker, I found a sweet little device called Open tracker. It is just about the same size as the Tiny Tracker 3 however it does much more! This baby has a voltage and temp sensor built right on the board. It can transmit this data with each beacon. It has two profiles that can be activated by a number of different events. It can even stop transmitting when the battery gets low. Best of all if you want to change the firmware there is no need to spend money on a new chip. Just re-flash the one you have and off you go. It's about a 2 hour build. Easy to follow info sheet. Well supported on the yahoo group. Pin for Pin compatible with the TT3.
|
